Water Fountain online
Resin Ribbed Slate Outdoor Water Fountain Quiet 50 in
Resin Ribbed Slate Outdoor Water Fountain Quiet 50 in
Couldn't load pickup availability
Share
SLATE OUTDOOR WATER FOUNTAIN
The Ribs Slow the Water Down
Four dark slate columns at staggered heights, each face cut with fine horizontal ribbing from top to bottom. Those ribs are not decoration. Water follows the horizontal channels as it descends rather than falling freely, which holds it against the surface and controls how fast it travels. The result is a continuous trickle instead of a splash, and it is the quietest sound of any piece this tall in the range.
That matters more than it sounds. Most fountains near four feet are built to be heard across a garden. This one is built to be heard from a chair beside it and nowhere else, which makes it one of the few pieces at this height that works next to a window, a reading spot, or a home office. Warm white LEDs sit at the top of each column and light the water as it starts down.
One placement note before anything else. The slate is dark, close to charcoal. Against a white fence, pale render, or light gravel the staggered outline is instantly legible, which is why the product photography uses exactly that. In front of a dark stained fence or a mature hedge it flattens out by mid afternoon and you lose the shape.
What Makes This Fountain Different
- Ribbing that does acoustic work, not visual work. A smooth faced fountain lets water fall freely, and free falling water makes noise when it lands. Horizontal channels keep the water in contact with the surface the whole way down, so it never gathers speed and never gathers into a drop. What you get is an even continuous trickle at four feet of height, which is a combination almost nothing else offers. If you have wanted a tall water feature but not the sound that usually comes with one, this is the piece that solves it.
- Under ten inches deep. Four columns on a 9.8 inch footprint means it goes into the strip along a fence, beside a door, or against a wall without narrowing the walking space. Most floor fountains this tall need considerably more floor.
- Staggered heights instead of one flat face. Four columns at different heights give the piece depth from an angle rather than reading as a single slab. It also means the water starts at four different points, which layers the trickle rather than repeating it.
- Rated for indoors as well. The quiet flow is what makes that realistic. A four foot fountain producing a splash is a lot inside a room. This one is closer to background than to feature, so a hallway, a home office, or a sunroom are workable.
The quietest tall piece here. Because the ribbed channels hold water against the surface for the entire descent, there is no free fall and no impact, so the sound is a low continuous trickle with no rhythm to pick out. It works beside seating, under a window, and in a room. It will not cover traffic or a neighbor's equipment, and it is not trying to. How loud it seems will still shift with the water level and whether it sits against a hard wall, which is why a fixed decibel number would tell you nothing useful about your own space.
Quick Specifications
| Design | Four staggered columns with horizontal ribbed channels |
|---|---|
| Material | Resin |
| Finish | Ribbed slate texture, dark gray |
| Dimensions | 16.9 in. long, 9.8 in. wide, 50.7 in. high |
| Weight | 46.3 lb. |
| Water flow | Guided descent along horizontal channels |
| Lighting | Warm white LED at multiple tiers |
| Pump | Included submersible pump, UL certified |
| Power | AC plug in, 110V |
| Water connection | Self-contained, no plumbing required |
| Recommended use | Indoor and outdoor |
Setup, Care, and Warranty
Setup and placement
Fill it, plug it in, done. No plumbing and nothing to bury. At 46.3 pounds and just over four feet, two people make it easier, mostly because of the height.
Level it before filling. On a ribbed face an out of plumb column sends the whole flow to one edge instead of spreading across the channels, and the quiet even trickle is exactly what you lose.
Water level and daily care
Keep enough water in the reservoir to cover the pump at all times. Water spread thin across ribbed faces evaporates faster than a single stream, so check every few days in warm weather.
Keep the channels clear. Debris caught in the ribbing diverts water off the face, and on this design that turns a silent trickle into a drip you will notice.
Cleaning the ribbed surface
In hard water areas mineral film builds inside the fine horizontal grooves, which is where it is hardest to remove once set. Wipe the wet faces with a soft cloth regularly rather than waiting for it to show. Keep harsh liquid cleaners off the finish, and do not use anything abrasive on the ribbing.
Winter storage
Before hard freezes, drain the reservoir completely, disconnect and store the pump indoors, and dry the columns. Water left in the channels through a freeze and thaw is what causes damage. At 46.3 pounds it can come inside, which is straightforward given it is rated for indoor use anyway.
3 year warranty
This product includes a 3 year warranty. Coverage, claim requirements, and required documents are subject to the warranty policy that applies at the time of purchase. Keep your order confirmation, and contact customer support with your order details if service is needed.
Questions Before You Choose
What background does it need?
A pale one. White fencing, light render, pale gravel, or a light wall. Dark slate against pale background makes the staggered outline read from anywhere in the garden. Against a dark fence or a dense hedge the shape flattens and disappears by mid afternoon, which is the most common way people are disappointed by a dark piece.
Is it really quiet enough for indoors?
Yes, and that is the main reason to choose it over other tall pieces. The ribbed channels prevent free fall, so there is no impact sound. Indoors it reads as background rather than as a feature. You need an outlet within reach and a floor that tolerates the occasional splash, but the sound will not be the problem.
How is it different from the smooth faced water walls?
A smooth sheet flow gives a broad even wash with more volume to it, which is what you want if the goal is covering other noise. Ribbing slows the water further and produces less sound, which is what you want if the goal is a quiet presence. Same idea, opposite ends of the volume range.
Is it safe around children and pets?
At four feet on a narrow footprint it is taller than it is stable, so keep it against a wall rather than free standing in a walkway, and out of the main running route. Run the cord along the wall base so it will not catch a foot. The recirculating water is not intended for drinking.
